STEVEN DOUGLAS, GENERAL MANAGER, YORK WASTEWATER TREATMENT PLANT, USA
02/22/2013
A Capstone C1000 and C600 operate on natural gas and biogas produced from York's 26 million gallons of sewage each day. "The Capstone microturbines produce 40 percent more power using the same amount of natural gas than our internal combustion engines, that's incredible. The Capstone turbines had some advantages over other manufacturer's turbines, one being that there was no liquid lubricant in the system at all. It was all air cooled, air lubricated, very low maintenance costs. The only thing that we routinely need to check is an air filter, and that's it. The other thing that people don't think about with a wastewater treatment plant is we also have the air to deal with. These microturbines emit so much less air pollution than the engines that we currently run to the point where I may not even have to report to the agency, the DEP, the amount of pollutants — it's going to be negligible."
View Case Study (pdf) ›EXECUTIVE DIRECTOR OF SPECIAL PROJECTS, SALEM COMMUNITY COLLEGE, USA
01/08/2010
To continue to serve as a Red Cross Disaster Relief Shelter, Salem Community College in New Jersey needed to install a back-up power system that provides electricity, cooling, and heating to Davidow Hall — the 65,000-square-foot campus building that serves as the county’s shelter during emergencies. In 2009, the College installed three Capstone C65 ICHP MicroTurbines, a 100-ton Thermax absorption chiller, and a Capstone APS. The energy system provides 80% of the massive building’s electricity and 100% of cooling and heating each day, and produces grid-disconnect back-up power in an emergency. “I’m a strong believer that if this technology was used at other colleges, K–12 schools, municipalities, and county government facilities, there would be significant money saved,” Raymond Constantine, Executive Director said. “That means money going back to the community. I’m excited we’re at the forefront of energy innovation and a model for others to follow.”
View Case Study (pdf) ›GERARD DEEN, FOUNDER DEEN SHIPPING, EUROPEAN INLAND WATERWAYS
05/01/2012
Two liquid natural-gas fueled Capstone C30 MicroTurbines onboard the Argonon Type C tanker in the Rhine River in Europe, operate in an N+1 setting and serve as the main electrical power supply. The onboard clean-and-green microturbines, meet strict emission regulations without additional exhaust aftertreatment. "Argonon Shipping strives to be an innovative, socially-responsible company and Capstone microturbines absolutely fit our mission to have a clean-and-green profile."
View Case Study (pdf) › View Case Study (Video) ›JÜRGEN MAHR, DEPUTY PLANT MANAGER, WINTERSHALL HOLDING GMBH, GERMANY
04/15/2014
A C65 microturbine produces electricity for Wintershall Holding GmbH, in Großaitingen, Germany and uses heat exhaust to warm facility buildings, process heating, and to heat pipelines. "We are producing electricity from the turbine which we use here in the facility. We are producing about 40 percent of our electricity needs here at the plant. In the future we are thinking about using the heat from the turbine for our facilities, building, process heat, and also for heating our pipelines. We are very satisfied at the moment with the turbine and what we got as a result of the test."
View Case Study (pdf) › View Case Study (Video) ›Stephan Hunz, CEO, Grid Operation & Electricity Department, enwor energy & water spot GmbH
06/11/2014
Located in Würselen, Germany, Aquana Sauna and Recreation Pool features a family-friendly wellness, sauna and leisure spa and an 1,800-square-meter (2,153-square-yard) water park. To meet the high electrical demand necessary to maintain comfortable water temperatures and operate the abundant rides and amenities in an environmentally friendly way, a C200 natural-gas fueled Capstone Microturbine® in a combined heat and power (CHP) application was installed. "It is quite obvious green technologies with low emissions and high efficiencies take center stage, and microturbines fulfill all the requirements—especially in CHP plant applications."
Tobias Neidhardt, CEO of A. Obenhauf GmbH & Company, Germany
03/14/2014
Four Capstone C65 microturbines installed in a combined heat and power (CHP) system supply thermal power and electricity to the cardboard manufacturing plant, A. Obenauf GmbH, in Bad Harzburg, Germany. "We looked at other products, but they did not deliver the high temperatures needed. We searched a long time, but other systems–like gas motors–had the heating energy on the wrong temperature value for us. Because we need consistently high temperatures for our drying systems, we choose the Capstone turbines."
View Case Study (pdf) › View Case Study (Video) ›Paul Swam, Technical Coordinator for the Sport Centre De Scheg, Netherlands
02/03/2014
The Sport Centre De Scheg in Deventer, Netherlands rely on a C200 Capstone microturbine installed in a combined heat and power (CHP) application for operation. "Our reciprocating generator was prone to failure, required a lot of maintenance, and cost a lot of money. The Capstone turbine we have provides us extra heat and power. An important part of our decision was we wanted clean energy production, and the emissions are very low from this turbine."
View Case Study (pdf) › View Case Study (Video) ›Andreas Kirsenhofer, Technical Plant Manager, Machland Fruit and Vegetable Delicacies GmbH, Austria
01/15/2014
A Capstone C200 microturbine installed in a combined cooling, heating, and power (CCHP) application generates electricity for the Machland food manufacturing plant and exhaust heat used as combustion air for an onsite steam boiler. "The energy costs of our products are very high and our plant equipment was outdated. We searched for a combined solution of turbines and a steam boiler to save energy costs. A benefit with the Capstone microturbine was the option to operate in stand-alone mode in case of grid failure. We are very successful with our project."
View Case Study (pdf) › View Case Study (Video) ›Ronald Hite, District Manager, Southern California Edison, USA
11/06/2013
Twenty-three Capstone C65 microturbines provide prime power to Southern California Edison's Avalon site on Catalina Island. "What the Capstone microturbines do for Southern California Edison on Catalina Island is allow us to meet the islands electrical demand and frequency moment by moment perfectly. The fact that this is an isolated microgrid on an island means I have to meet demand continuously, 24/7, with voltage and frequency."
View Case Study (pdf) › View Case Study (Video) ›James Jenkinson, Swineline Farm, South Africa
09/10/2013
The installation and operation of one Capstone C65 microturbine unit has helped reduce electricity usage at Swineline Farm, an anaerobic waste treatment facility. "The technology is top notch. I was sold immediately the day I saw how it connects to the grid — how easily it connects — and how little maintenance there is on the whole plant. Installation of this turbine has reduced my electricity usage by a good 30 percent, up to 35 percent. The farm is a very small farm when you are looking at effluent production. We have only got one turbine installed but by getting the process more effective it could get to the point that I can reduce my electricity usage by even more."
View Case Study (pdf) › View Case Study (Video) ›Toni Habermacher, Production Manager, Gefu Produktions AG, Switzerland
07/26/2013
When faced with a surplus of milk sugar, Gefu created an opportunity to generate onsite electricity and heat. Using 12 Capstone CR65 microturbines installed in a combined heat and power (CHP) application, Gefu converts waste milk sugar to generate about 6.5 Gigawatt Hours (GWh) of electricity. "We didn't know exactly what to do with the milk sugar. So, five years ago we decided to build a biogas plant to use the milk sugar as energy, and use the biogas in microgas turbines to produce electric energy. The main point behind this idea was to produce cattle feed without using or producing CO². We wouldn't have been able to do it if we hadn't built the biogas plant, and if we hadn't chosen the Capstone turbines, a new steamer, and hot air for spray drying plant. That gives us the efficiency, and that makes us the leader in producing cattle feed without CO²."
View Case Study (pdf) › View Case Study (Video) ›Raffaello Di Martino, Technical Director, CEM Ambiente, Italy
03/12/2013
Five highly efficient C65 microturbines in a combined head and power (CHP) application power the first-ever installation at an Italian landfill in Italy. "We chose the Capstone microturbines because the production of methane became so low. Classic engines can't run on biogas that contain less than 30 percent methane. We are very happy with the Capstone microturbines because of their low cost, low maintenance, and the benefit to this beautiful area."
View Case Study (pdf) › View Case Study (Video) ›Kevin Stevenson, Manufacturing VP, Engineering, FDS Manufacturing, USA
03/16/2012
FDS Manufacturing Company in Pomona, California, selected six Capstone C65 MicroTurbines® to meet the facility's forecasted combined cooling, heating, and power (CCHP) needs, and significantly shrink its carbon footprint and energy bill — a cleaner way to do business. "Ultimately, our microturbines make us more competitive and conscious of the environment. They've been a great sales tool and resource that supports our intent to be a green manufacturer."
View Case Study (pdf) › View Case Study (Video) ›Marvin Dixon, Director of Engineering, Four Seasons Hotel Philadelphia, USA
07/27/2010
The world-renowned Four Seasons Hotel Philadelphia installed three C65 ICHP Capstone MicroTurbines® with Heat Recovery Modules to capture the microturbines’ waste heat as part of a CHP application and generate the hotel’s own onsite power. “This new process with microturbines allows for more control over heat distribution and BTUs. “With such a highly efficient process, the hotel is able squeeze every dollar out of each BTU. Instead of dumping rejected heat into the atmosphere, we can reuse it. During the first two months of operation we saw a cost avoidance of over US $80,000.”
View Case Study (pdf) ›Nicolas Pouillaude, President of Revico, Cognac, France
07/19/2010
A C800 Power Package is fueled by methane from the treatment of sludge waste (from grape skins and stems) following the distillation of wine to make Cognac. “We were very satisfied with how quickly we were able to produce electricity from the C800 microturbine without a long testing period. We’ve had great success with our investment in the Capstone microturbine. For many years, Revico has been a pioneer in environmental protection in the region. With the Capstone C800, we continue to be first-in-class in protecting the region’s environment. In fact, French and European officials consider the innovative Capstone turbine system so environmentally friendly they offered Revico a significant subsidy to install the system.”
View Case Study (pdf) ›Pablo Escalante, Spokesperson, YPFB Transporte SA, Bolivia
07/14/2010
Since 2006, YPFB Transporte has installed 11 Capstone C65 MicroTurbines at pipeline compressor stations across the country. “Reduced maintenance on the Capstone microturbines is very important because our compressor plants are usually far from cities. The microturbines reduce interruption in the service we provide, which makes our service more trustworthy. Maintaining microturbines costs about 40% less than a normal generator. We save time and money by not needing to maintain the units all the time.” He indicated the microturbines are expected to pay for themselves in approximately five years.
View Case Study (Video) ›Andreas Fidelak, Director, St. Joseph Hospital, Prüm, Germany
04/22/2010
When officials at St. Joseph Hospital chose to be the first in Germany to install a Capstone C65 MicroTurbine® in a combined heat and power (CHP) application, they hoped for and got great results. The Capstone C65 CHP system saves the hospital €22,500 (US$30,642) annually in energy costs. “Our efforts to provide the Prüm population with high-quality, affordable medical services was forefront in our minds as we invested in this new equipment for the hospital. We wanted to make the best decision for our patients and our bottom line. The hospital’s technical director believed a turbine would be the best economical decision in large part because of the lower maintenance costs.”
View Case Study (pdf) ›Fabio Dalla Villa, Chief Technology Officer, Cossato Spolina WWTP, Italy
05/12/2009
A biogas fueled Capstone CR200 MicroTurbine will supply the wastewater treatment plant, located in Cossato, Italy, with 1.7 million kWh of electrical power and 2.3 million kWh of thermal energy annually — all while reducing the plant’s greenhouse-gas emissions. “I discovered that turbine systems have much lower maintenance costs, and that they have much better performance in hot-water production. You must know that we need hot water in the waste treatment process. And, I must admit, I am very interested in new, original systems. Capstone was very convincing,” Dalla Villa said. “I prepared the system for expansion. I plan to demonstrate with indisputable numbers that a second CR200 will be economically useful. In the meantime, I can already show the economic evidence of our investment so far. With the micro-CHP plant, we will save a lot of money with electricity self-production and the green certificates incentives.”
View Case Study (pdf) ›John Lehne, Building Manager, Ronald Reagan Presidential Library, USA
05/08/2009
Commissioned in 2005, the CCHP installation consists of 16 Capstone C60 MicroTurbines that provide the Library, located in Simi Valley, California, with 95% of its energy needs. “A lot of people didn’t know about this type of system when we first installed it. We’ve now had the system three years and it gives us the efficiency we were looking for,” Lehne said. “Exhaust gas from the running microturbines is collected and goes into the absorption chiller. The chiller has a closed water loop through it, which chills and gives us cold water for our air-conditioning system. Some of the turbines have a hot water loop on them, which gives us heat for our building as well. It provides power for the full campus and is clean burning. Overall we are pleased with the performance of the turbines, the efficiency of their electricity-generating capabilities, and the hot water they provide to the facility.”
View Case Study (pdf) › View Case Study (Video) ›Pablo Escalante, End User and Authorized Service Provider
07/20/2007
In qualification from 1 to 10, the qualification is 9: Clean and reliable energy, that has been accepted like a serious alternative for production of electrical energy at the Transredes facilities in Bolivia. This is what makes this technology a solid candidate to replace the traditional energy production with generators and establishes itself like a traditional product for the coming projects. We have a lot of inquiries from other petroleum companies about the installation of these products, which makes me believe that there is a strong interest in microturbines and in how they perform in the field and how do they affect productivity and the environment.